One Up Offroad
Hover over image to zoom

10" 08+ Super Duty Traction Blocks

SKU: 101266
10" Traction Blocks with Bump stops for 8" lifts on 2008+ Super Duty
Jobber: $605.00
$673.00
$605.00
 
Availability: In Stock

It is mandatory to run and 101065 top plate with this traction block.

It is mandatory to do a U-Bolt flip if your truck does not already have U-Bolts down.

If your truck is a 2010 or older you will need an OUO U-Bolt under axle Bottom Plate Kit #101084 if you have a 4 inch axle tube OR a #101085 if you have a 3 1/2 inch axle tube.

If you have a 2011 and newer truck you can reuse your under axle U-Bolt bottom plate but you have to drill out the holes to 13/16 diameter to accept the 3/4" U-Bolts.

If you don't want to drill out your factory bottom plates you can run OUO U-Bolt under axle Bottom Plate Kit #101084 OR #101085.
Qty in Stock: 15
Approx Weight: 70 lb. / Each

Dimensions (LxWxH): 16.00 x 20.00 x 16.00 in.
16.00 x 20.00 x 16.00 in.

-----------------------------------------------------------------------------

Please understand that we do our best to stock every single item that we sell in our webstore at all times, but occasionally, we sell out before our next run of parts are ready to go.

To verify stock on an item before you order, you can always email us at Orders@oneupoffroad.com, and we will gladly stock check items. You can also give us a call at 888-98ONEUP and we will do the same.

Most items usually ship within 24 hours, but in the rare occasion of a backorder, we usually fill all backorders within 2-4 weeks.

Thank you for your business!

Tell a friend about this product
Include a Note:
Allowed Credit Cards
Powered by Fortune3